|
|
Agglomeration of animal feed mixtures
Moravec, Jan ; Lacina,, Lubor (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of this work focuses on the description of mechanical properties of compound feed produced in cooperation with Mendel University in Brno. These properties are mainly flow properties, which are crucial for the technological processes of these mixtures. The first part of this work also contains a general information about commonly used shear devices. Jenike's Shear Cell and Rheometer FT4 from company Freeman Technology are described in more detail. Because of the complexity of the behavior of these materials, their properties are mostly found the experimental way, which is the main topic of the practical part of this work. In this section you can find a description of measurements performed on Jenike's Shear Cell and on the Rheometer FT4. Moreover measurements of strength and length of granules were undertaken. Further the analysis of powder feed mixtures on sieves is described. Materials analyzed were compound feeds for chickens. Mutually they differed in the content of mealworms. Pellets were made from the mixtures and were then also subjected to measurement.
|
|
|
Bulk properties of fine particulate solids as the function of the selected material parameters.
Slanina, Ondřej ; Roman,, Fekete (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of the thesis focuses on the description of particulate materials and their mechanical behaviors with a focus on flow properties. Great emphasis is placed on measuring the shear properties using a Jenike shear machine, on the correct procedure for standardized measurement and evaluation using Mohr's circles. The theoretical part focuses on the characterization of particulate matter using a variety of methods available, such as visual, separation, sedimentation, surface methods and methods of scanning field and flow. The practical part is focused on the determination of flow characteristics and surface finishing of finely ground limestone Omyacarb VA with various grain sizes. The surface was modified using stearic acid and calcium stearate. Attention was paid to the influence of the concentration of surface-regulating substances on the flowability of the material. The flowability of commercially supplied material was compared with lab modified materials and the determination of the theoretical content of stearic acid or calcium stearate was accomplished. Shear properties were measured using the Jenike shear machine. The material was further tested by laser diffraction and SEM with EDS particle surface analysis and elemental surface mapping.
|
|
|
Continual helicoidal mixer
Pelka, Tomáš ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project works out and is focused on the continual mixing process of the particular matters. The project is divided into following chapters. Chapter 1 includes mixing theory and information of the experimental work of the particular matters for blade using. In chapter 2 there is Evaluation and calculation of the technical parameters for the mixer. Chapter 3 deals with the engine proposal and chapter 4 includes calculation and design work of the gear transmission. Chapter 5 includes the stress analysis of the shaft and blade with the I-deas software. In attachment there are also the mixer arrangement drawing and detailed drawings of the key parts and groups for the mixer.
|
|
|
Two shaft continuous mixer
Lukuvka, Šimon ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project solves questions of blending processes and mixers of partikular materials. In the first and the second part is solved theoreticel analysis of blending processes. Contain of the third and the fourth part is designing and calculating of the mixer´s parameters.
|
|
|
Agglomeration of animal feed mixtures
Moravec, Jan ; Lacina,, Lubor (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of this work focuses on the description of mechanical properties of compound feed produced in cooperation with Mendel University in Brno. These properties are mainly flow properties, which are crucial for the technological processes of these mixtures. The first part of this work also contains a general information about commonly used shear devices. Jenike's Shear Cell and Rheometer FT4 from company Freeman Technology are described in more detail. Because of the complexity of the behavior of these materials, their properties are mostly found the experimental way, which is the main topic of the practical part of this work. In this section you can find a description of measurements performed on Jenike's Shear Cell and on the Rheometer FT4. Moreover measurements of strength and length of granules were undertaken. Further the analysis of powder feed mixtures on sieves is described. Materials analyzed were compound feeds for chickens. Mutually they differed in the content of mealworms. Pellets were made from the mixtures and were then also subjected to measurement.
|
|
|
Continual helicoidal mixer
Pelka, Tomáš ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project works out and is focused on the continual mixing process of the particular matters. The project is divided into following chapters. Chapter 1 includes mixing theory and information of the experimental work of the particular matters for blade using. In chapter 2 there is Evaluation and calculation of the technical parameters for the mixer. Chapter 3 deals with the engine proposal and chapter 4 includes calculation and design work of the gear transmission. Chapter 5 includes the stress analysis of the shaft and blade with the I-deas software. In attachment there are also the mixer arrangement drawing and detailed drawings of the key parts and groups for the mixer.
|
|
|
Two shaft continuous mixer
Lukuvka, Šimon ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project solves questions of blending processes and mixers of partikular materials. In the first and the second part is solved theoreticel analysis of blending processes. Contain of the third and the fourth part is designing and calculating of the mixer´s parameters.
|
|
|
Bulk properties of fine particulate solids as the function of the selected material parameters.
Slanina, Ondřej ; Roman,, Fekete (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of the thesis focuses on the description of particulate materials and their mechanical behaviors with a focus on flow properties. Great emphasis is placed on measuring the shear properties using a Jenike shear machine, on the correct procedure for standardized measurement and evaluation using Mohr's circles. The theoretical part focuses on the characterization of particulate matter using a variety of methods available, such as visual, separation, sedimentation, surface methods and methods of scanning field and flow. The practical part is focused on the determination of flow characteristics and surface finishing of finely ground limestone Omyacarb VA with various grain sizes. The surface was modified using stearic acid and calcium stearate. Attention was paid to the influence of the concentration of surface-regulating substances on the flowability of the material. The flowability of commercially supplied material was compared with lab modified materials and the determination of the theoretical content of stearic acid or calcium stearate was accomplished. Shear properties were measured using the Jenike shear machine. The material was further tested by laser diffraction and SEM with EDS particle surface analysis and elemental surface mapping.
|
guest ::
